Air Burner Rental in Winston-Salem, NC
Burn green waste, not cash.
Air curtain burners for clean wood waste in Winston-Salem: 90%+ less smoke than open burning, 95% volume reduction, and no truck trips to the landfill.
What Winston-Salem contractors burn with us.
Clear lots for new home construction by burning trees, stumps, and brush on-site.
Process large volumes of woody debris from commercial clearing across Winston-Salem.
Rapidly burn storm-downed trees and vegetative debris after severe weather events.
Dispose of brush and trees cleared from utility corridors and road right-of-ways.
Clear agricultural land for development or clear overgrown parcels for farming use.
Stop paying to haul air.
Vegetative debris tipping fees in North Carolina average $35.0 per ton. Brush is bulky, fills trucks fast, and weighs nothing: you are hauling air at a premium. An on-site burn cuts the trips, the fees, and the wait at the landfill.
Hauling cost based on $4.50/loaded mile, round-trip. Estimate only: your final quote uses real Winston-Salem-area rates and your project specifics.
per project, vs. hauling to the landfill
On-site burning vs. hauling: cost comparison for Winston-Salem contractors.
On a typical land clearing project in Winston-Salem, vegetative debris represents the highest disposal cost per unit of useful work done. Brush fills a truck in minutes but barely registers on the scale. At $35.00/ton and 25 miles to the nearest disposal site, you spend more on trucking air than on actual project work.
An air curtain burner changes the economics completely. Processing 3-9 tons of wood waste per hour, a single burn day eliminates what would take a week of hauling. The ash left behind is a thin layer that gets graded into the site.
Winston-Salem land clearing contractors who burn regularly end up buying an air curtain burner through our main site.
Clean wood only. Compliance starts at the pile.
Air curtain burners are designed for clean wood waste. Anything else and you risk losing your permit, your day, or both.
You can burn
Vegetative debris from land clearing, storm cleanup, and right-of-way work is the bread and butter.
You can't burn
Anything non-vegetative voids your permit and trips opacity limits. Keep the pile clean: it is the difference between a good day and a citation.
Two units. Pick by tons-per-hour.
We connect you with two Merris models in Winston-Salem: both air curtain burners, same compliance, different throughput. Not sure which fits? Tell us your project, we will size it.
Merris WX-5
- Throughput3-6 tons/hr
- Burning area13'-4" x 5'-6"
- Weight18,000 lbs
- Best forResidential / small commercial
- TransportCable hoist truck
Single-lot clearing, storm debris cleanup, or smaller right-of-way work: generally under 100 tons of debris.
Merris WX-8
- Throughput6-9 tons/hr
- Burning area21'-5" x 5'-6"
- Weight24,000 lbs
- Best forLarge commercial / multi-acre
- TransportCable hoist truck
Multi-acre clearing, large commercial site prep, or extended storm response: 100+ tons of debris.
Permitting is your job. We make it easier.
Air curtain burners are easier to permit than open burning, but this is the most permit-intensive equipment in our network. Plan 4-6 weeks for processing. Below: who to call, what to file, and what to have on hand.
Air curtain burner operation in North Carolina is regulated by the NC Department of Environmental Quality (DEQ). The governing statute is 15A NCAC 02D .1904. Contact your Forsyth County fire marshal and the state agency for specific permit requirements before mobilizing equipment.
Most Forsyth County jurisdictions require a burn permit, site inspection, and notification of adjacent property owners. Air curtain burners are easier to permit than open burning because they reduce visible smoke by 90%+. Many jurisdictions that prohibit open burning still allow air curtain burner operation with proper permits.
State of North Carolina
- Air quality permit from NC DEQ NC Department of Environmental Quality
- Burn authorization from NC Forest Service Required before each operating period
- Compliance with state air quality rules Opacity limits + state ozone-action-day stand-down
Who to call
- NC DEQ
- 877-623-6748
- NC Forest Service
- ncforestservice.gov
Forsyth County
- Local burn permit from county fire marshal Site inspection may be required
- Adjacent property owner notification Written notice in many jurisdictions
- Property owner approval (if not on your land) Written authorization on file
- On-site fire suppression Adequate water supply or rated extinguishers
- Setback & opacity compliance No burning during drought / high-wind advisories
Who to call
- Forsyth County Fire Marshal
- Contact your local fire department
- Forsyth County Environmental Office
- Contact county government
Three steps. One business day.
Tell us what you need
Equipment type, Winston-Salem jobsite location, and rental duration. Quick form or call 770-433-2670.
Get your quote
Our team matches you with the right unit and provides a competitive quote within one business day.
Equipment delivered
We coordinate delivery to your Winston-Salem jobsite. Equipment arrives ready to operate. Pickup when you are done.
Why Winston-Salem burns more debris than ever.
Land clearing projects in Winston-Salem generate massive volumes of wood waste, brush, and stumps. An air curtain burner rental lets you burn that debris on-site, legally and cleanly, reducing material to ash in hours instead of weeks of hauling. Winston-Salem's Wake Forest Innovation Quarter biotech campus expansion, downtown Arts District development, and Bailey Park corridor transformation. creates steady demand for efficient land clearing equipment across Forsyth County.
We connect Winston-Salem contractors with Merris WX-5 and WX-8 air curtain burners delivered to your jobsite. The trailer-mounted WX-5 handles residential and light commercial clearing. The WX-8 runs production-scale burning on large commercial and municipal projects in Forsyth County. Both achieve 95%+ volume reduction with 90% less visible smoke than open burning.
Winston-Salem's 0.8% growth rate in Forsyth County is anchored by the Wake Forest Innovation Quarter, a 330-acre biotech and research campus driving institutional construction. The Arts District and Bailey Park corridor transformation add urban infill projects to the construction pipeline. Truist (formerly BB&T) and Hanes Brands' continued downtown presence supports commercial renovation demand.
Contractors working across Winston-Salem's Downtown, Innovation Quarter, and Ardmore areas need reliable equipment access. Having an air burner delivered to your jobsite saves the round-trip haul to the nearest disposal facility every day you are on the job.
Instead of hauling brush and stumps to Hanes Mill Road Landfill, an air curtain burner processes land clearing debris directly on your Winston-Salem jobsite. No trucking costs, no tipping fees, no project delays.
Similar to Greensboro. Four seasons, occasional ice storms in winter.
Winston-Salem's active construction market drives demand for land clearing and woody debris disposal. Current and recent projects include:
- Wake Forest Innovation Quarter biotech campus expansion, including new research buildings and adaptive reuse of former R.J. Reynolds tobacco facilities.
- Arts District mixed-use development along Trade and Liberty streets, with demolition and new construction.
- Bailey Park corridor residential and commercial construction, adding density to the Innovation Quarter area.
Equipment rental demand in Winston-Salem is driven by contractors supporting Atrium Health Wake Forest Baptist, Wake Forest University, and Hanes Brands. Along with general construction and demolition companies serving Forsyth County. The city's Piedmont clay and sandy loam makes screening equipment valuable for processing excavated material into reusable fill. Healthcare facility construction, road and infrastructure improvements, and commercial development all contribute to steady demand for crushing and screening equipment.
Vegetative debris tipping fees in North Carolina average $35.00 per ton. Brush is one of the least efficient materials to haul: it fills trucks fast but weighs very little. You are paying to haul air at $35.0/ton to Hanes Mill Road Landfill, 25 miles away.
An air curtain burner processes that same material on-site with 95%+ volume reduction. No truck trips, no tipping fees, no waiting in line. A single day of burning eliminates what would otherwise require dozens of truck loads. For a 50-ton clearing job, that is $1,750 in tipping fees saved, plus thousands more in trucking.
North Carolina's mild winters keep crews working twelve months a year.
Plan burns for early morning to avoid daily lightning shutdowns.
Storm debris demand spikes: book early or risk waiting list.
Delivered to your Winston-Salem jobsite.
Equipment delivery to Winston-Salem in Forsyth County is served by I-40, US-52, and US-421, providing efficient access for heavy equipment transport from staging yards across the region. The typical delivery radius covers Forsyth County and surrounding counties within a 50 to 75 mile range. Standard delivery timelines apply, though contractors should coordinate scheduling in advance during peak construction season to secure preferred delivery windows.
Air burner rental FAQ: Winston-Salem.
Air curtain burner rental pricing in Winston-Salem depends on unit size and rental duration. The WX-5 handles most land clearing jobs. The WX-8 runs production-scale burning. Contact us at 770-433-2670 for a quote based on your Forsyth County project.
Air curtain burners are designed for complete combustion to ash, not biochar production. Biochar requires controlled pyrolysis (burning with limited oxygen). Some operators have experimented with partial burns, but the results are inconsistent. If biochar is your goal, look at dedicated biochar kilns.
Setback requirements vary by North Carolina county. Typical requirements include 100-300 feet from occupied structures, 50 feet from property lines, and 25 feet from woodlines. Check with your Forsyth County fire marshal for exact distances. Some jurisdictions have additional setbacks from roads and waterways.
Simple burn permits from local fire departments often issue same-day or within a few days. State-level air quality permits from North Carolina's environmental agency may take 2-6 weeks. Apply early. Air curtain burner permits are generally faster to get than open burning permits.
Yes. Stumps are one of the most cost-effective materials to burn on-site because they are expensive to haul (heavy, awkward to load, take up truck space). Split or quarter oversized stumps to fit the burn box. Root balls with dirt should be shaken out before burning to reduce ash volume.
Wood ash from an air curtain burner is clean, fine, and nutrient-rich. Most contractors leave it in the burn pit and grade over it, or spread it across the cleared site as a soil amendment. Ash from clean wood waste is not hazardous and does not need special disposal.
Yes. Most North Carolina jurisdictions need a burn permit and air quality authorization for air curtain burner operation. Contact your Forsyth County fire marshal and North Carolina's environmental agency for specific requirements. Air curtain burners are easier to permit than open burning because they reduce visible smoke by 90%+.
Need On-Site Burning? We'll Connect You.
Not looking to rent equipment yourself? We connect contractors, developers, and property owners with qualified operators who perform on-site burning using professional-grade air curtain burners. Tell us about your project and we'll match you with a provider in Winston-Salem.
- Licensed, insured operators with air burner experience
- Permit coordination included
- Equipment, fuel, and labor handled by the provider
- One point of contact through GCS
Renting doesn't fit your operation?
GrinderCrusherScreen.com sells new Merris air curtain burners and brokers quality used units across North America. Helping contractors find equipment since 1973.
Get Winston-Salem air burner pricing.
Tell us about your project. We will match you with the right unit and quote it inside a business day. Or skip the form: talk to the team direct.
Mon-Fri 8am-5pm EST. Since 1973. Sales@grindercrusherscreen.com
Get rental pricing
Quote inside one business day.
Prefer to talk? Call 770-433-2670. Mon-Fri 8am-5pm EST