Rent an Air Burner in High Point, NC
Burn green waste, not cash.
Air curtain burners for clean wood waste in High Point: 90%+ less smoke than open burning, 95% volume reduction, and no truck trips to the landfill.
What High Point contractors burn with us.
Clear lots for new home construction by burning trees, stumps, and brush on-site.
Process large volumes of woody debris from commercial clearing across High Point.
Rapidly burn storm-downed trees and vegetative debris after severe weather events.
Dispose of brush and trees cleared from utility corridors and road right-of-ways.
Clear agricultural land for development or clear overgrown parcels for farming use.
Stop paying to haul air.
Vegetative debris tipping fees in North Carolina average $35.0 per ton. Brush is bulky, fills trucks fast, and weighs nothing: you are hauling air at a premium. An on-site burn cuts the trips, the fees, and the wait at the landfill.
Hauling cost based on $4.50/loaded mile, round-trip. Estimate only: your final quote uses real High Point-area rates and your project specifics.
per project, vs. hauling to the landfill
On-site burning vs. hauling: cost comparison for High Point contractors.
On a typical land clearing project in High Point, vegetative debris represents the highest disposal cost per unit of useful work done. Brush fills a truck in minutes but barely registers on the scale. At $35.00/ton and 25 miles to the nearest disposal site, you spend more on trucking air than on actual project work.
An air curtain burner changes the economics completely. Processing 3-9 tons of wood waste per hour, a single burn day eliminates what would take a week of hauling. The ash left behind is a thin layer that gets graded into the site.
High Point land clearing contractors who burn regularly end up buying an air curtain burner through our main site.
Clean wood only. Compliance starts at the pile.
Air curtain burners are designed for clean wood waste. Anything else and you risk losing your permit, your day, or both.
You can burn
Vegetative debris from land clearing, storm cleanup, and right-of-way work is the bread and butter.
You can't burn
Anything non-vegetative voids your permit and trips opacity limits. Keep the pile clean: it is the difference between a good day and a citation.
Two units. Pick by tons-per-hour.
We connect you with two Merris models in High Point: both air curtain burners, same compliance, different throughput. Not sure which fits? Tell us your project, we will size it.
Merris WX-5
- Throughput3-6 tons/hr
- Burning area13'-4" x 5'-6"
- Weight18,000 lbs
- Best forResidential / small commercial
- TransportCable hoist truck
Single-lot clearing, storm debris cleanup, or smaller right-of-way work: generally under 100 tons of debris.
Merris WX-8
- Throughput6-9 tons/hr
- Burning area21'-5" x 5'-6"
- Weight24,000 lbs
- Best forLarge commercial / multi-acre
- TransportCable hoist truck
Multi-acre clearing, large commercial site prep, or extended storm response: 100+ tons of debris.
Permitting is your job. We make it easier.
Air curtain burners are easier to permit than open burning, but this is the most permit-intensive equipment in our network. Plan 4-6 weeks for processing. Below: who to call, what to file, and what to have on hand.
Air curtain burner operation in North Carolina is regulated by the NC Department of Environmental Quality (DEQ). The governing statute is 15A NCAC 02D .1904. Contact your Guilford County fire marshal and the state agency for specific permit requirements before mobilizing equipment.
Most Guilford County jurisdictions require a burn permit, site inspection, and notification of adjacent property owners. Air curtain burners are easier to permit than open burning because they reduce visible smoke by 90%+. Many jurisdictions that prohibit open burning still allow air curtain burner operation with proper permits.
State of North Carolina
- Air quality permit from NC DEQ NC Department of Environmental Quality
- Burn authorization from NC Forest Service Required before each operating period
- Compliance with state air quality rules Opacity limits + state ozone-action-day stand-down
Who to call
- NC DEQ
- 877-623-6748
- NC Forest Service
- ncforestservice.gov
Guilford County
- Local burn permit from county fire marshal Site inspection may be required
- Adjacent property owner notification Written notice in many jurisdictions
- Property owner approval (if not on your land) Written authorization on file
- On-site fire suppression Adequate water supply or rated extinguishers
- Setback & opacity compliance No burning during drought / high-wind advisories
Who to call
- Guilford County Fire Marshal
- Contact your local fire department
- Guilford County Environmental Office
- Contact county government
Three steps. One business day.
Tell us what you need
Equipment type, High Point jobsite location, and rental duration. Quick form or call 770-433-2670.
Get your quote
Our team matches you with the right unit and provides a competitive quote within one business day.
Equipment delivered
We coordinate delivery to your High Point jobsite. Equipment arrives ready to operate. Pickup when you are done.
Why High Point burns more debris than ever.
Land clearing projects in High Point generate massive volumes of wood waste, brush, and stumps. An air curtain burner rental lets you burn that debris on-site, legally and cleanly, reducing material to ash in hours instead of weeks of hauling. High Point's Market showroom construction and renovation, Congdon Yards mixed-use development, and downtown catalyst projects. creates steady demand for efficient land clearing equipment across Guilford County.
We connect High Point contractors with Merris WX-5 and WX-8 air curtain burners delivered to your jobsite. The trailer-mounted WX-5 handles residential and light commercial clearing. The WX-8 runs production-scale burning on large commercial and municipal projects in Guilford County. Both achieve 95%+ volume reduction with 90% less visible smoke than open burning.
High Point's 0.9% growth rate in Guilford County reflects steady demand driven by the biannual High Point Market, the world's largest furnishings industry trade show. Showroom construction and renovation generate predictable, cyclical construction activity. Congdon Yards mixed-use development and downtown catalyst projects are adding new demand beyond the furniture market cycle.
Contractors working across High Point's Downtown, Congdon Yards, and Emerywood areas need reliable equipment access. Having an air burner delivered to your jobsite saves the round-trip haul to the nearest disposal facility every day you are on the job.
Instead of hauling brush and stumps to White Street Landfill (Greensboro), an air curtain burner processes land clearing debris directly on your High Point jobsite. No trucking costs, no tipping fees, no project delays.
Piedmont Triad climate. Similar to Greensboro.
High Point's active construction market drives demand for land clearing and woody debris disposal. Current and recent projects include:
- High Point Market showroom district renovation and new construction to meet biannual trade show demand.
- Congdon Yards mixed-use development on the former Congdon rail yard site, with demolition and adaptive reuse construction.
- Downtown High Point catalyst project construction including residential, office, and retail development.
Equipment rental demand in High Point is driven by contractors supporting High Point Market Authority, Wake Forest University Health Sciences, and Bank of America. Along with general construction and demolition companies serving Guilford County. The city's Piedmont clay and loam makes screening equipment valuable for processing excavated material into reusable fill. Healthcare facility construction, road and infrastructure improvements, and commercial development all contribute to steady demand for crushing and screening equipment.
Vegetative debris tipping fees in North Carolina average $35.00 per ton. Brush is one of the least efficient materials to haul: it fills trucks fast but weighs very little. You are paying to haul air at $35.0/ton to White Street Landfill (Greensboro), 25 miles away.
An air curtain burner processes that same material on-site with 95%+ volume reduction. No truck trips, no tipping fees, no waiting in line. A single day of burning eliminates what would otherwise require dozens of truck loads. For a 50-ton clearing job, that is $1,750 in tipping fees saved, plus thousands more in trucking.
North Carolina's mild winters keep crews working twelve months a year.
Plan burns for early morning to avoid daily lightning shutdowns.
Storm debris demand spikes: book early or risk waiting list.
Delivered to your High Point jobsite.
Equipment delivery to High Point in Guilford County is served by I-85, I-74, and US-311, providing efficient access for heavy equipment transport from staging yards across the region. The typical delivery radius covers Guilford County and surrounding counties within a 50 to 75 mile range. Standard delivery timelines apply, though contractors should coordinate scheduling in advance during peak construction season to secure preferred delivery windows.
Air burner rental FAQ: High Point.
Air curtain burner rental pricing in High Point depends on unit size and rental duration. The WX-5 handles most land clearing jobs. The WX-8 runs production-scale burning. Contact us at 770-433-2670 for a quote based on your Guilford County project.
Book 1-2 weeks ahead for standard projects. Allow extra time during storm season or after major weather events when demand spikes. Permit processing adds time: apply for your burn permit before booking the equipment so the dates align. Call 770-433-2670 for availability.
Yes. If you prefer not to operate the equipment, we connect you with land clearing contractors who bring their own air curtain burner to your Guilford County site. They handle permits, operation, and cleanup. Call 770-433-2670 to discuss contracted burning options.
The fan unit on both the WX-5 and WX-8 runs on diesel fuel. The WX-5 consumes about 1 gallon per hour. The WX-8 consumes 2-3 gallons per hour. The burn itself is fueled by the wood waste being processed. No accelerants are needed or allowed.
Yes. Air curtain burners are one of the fastest ways to process storm-downed trees and vegetative debris. After hurricanes, tornadoes, and ice storms, High Point contractors use air burners to clear material that would otherwise need hundreds of truck loads to haul off-site.
Vegetative debris tipping fees in North Carolina average $35/ton. Brush is bulky and fills trucks fast but weighs little: you are hauling air at premium rates. On a 50-ton clearing job, burning on-site saves $1,750 in tipping fees alone, plus thousands more in trucking.
If you clear land occasionally, renting saves capital. If you run a land clearing business with steady volume, purchasing a Merris air curtain burner delivers better long-term ROI. New WX-5 units start at $137,500. GrinderCrusherScreen.com distributes Merris burners and brokers quality used units.
Need On-Site Burning? We'll Connect You.
Not looking to rent equipment yourself? We connect contractors, developers, and property owners with qualified operators who perform on-site burning using professional-grade air curtain burners. Tell us about your project and we'll match you with a provider in High Point.
- Licensed, insured operators with air burner experience
- Permit coordination included
- Equipment, fuel, and labor handled by the provider
- One point of contact through GCS
Renting doesn't fit your operation?
GrinderCrusherScreen.com sells new Merris air curtain burners and brokers quality used units across North America. Helping contractors find equipment since 1973.
Get High Point air burner pricing.
Tell us about your project. We will match you with the right unit and quote it inside a business day. Or skip the form: talk to the team direct.
Mon-Fri 8am-5pm EST. Since 1973. Sales@grindercrusherscreen.com
Get rental pricing
Quote inside one business day.
Prefer to talk? Call 770-433-2670. Mon-Fri 8am-5pm EST