Franklin Screener Rental
Screen it on-site. Sort it into profit.
Mobile screening equipment for C&D, aggregate, and soil processing in Franklin. The CD410 vibratory screener separates fines, middles, and overs in one pass. Two decks, three conveyors, three products.
What Franklin contractors screen on-site.
Separate mixed demolition debris into clean aggregate, sized fines, and oversized rejects. Reduce disposal volume by 40-60% and recover reusable material on-site.
Sort gravel, crushed stone, and sand into spec products. Two decks and three conveyors produce three grades simultaneously from a single feed.
Remove rocks, roots, and debris from excavated soil. Clean topsoil stays on-site for grading and landscaping. Contaminants go to a smaller reject pile.
Scalp out fines and dirt before feeding a jaw crusher. Cleaner feed means higher throughput and less jaw plate wear. Both machines on one delivery.
Separate bark, chips, and fines from mixed log yard material. Recover chips for mulch or biomass. Remove contaminants that reduce product value.
Process excavated landfill material to recover aggregate, soil, and reusable fill. Screening reduces the volume headed back to disposal.
Stop hauling unsorted material.
C&D tipping fees in Tennessee average $47.5 per ton. Every ton you sort on-site is a ton you do not pay full tipping on. Screening recovers reusable aggregate and fines worth $8-18 per ton, while reducing the volume you haul by 40-60%.
Hauling cost based on $4.50/loaded mile, round-trip. Recovered material valued at $12/ton average. Estimate only: your final quote uses real Franklin-area rates and your project specifics.
per project, vs. hauling unsorted material
Sorted material has higher value than mixed debris. Clean aggregate sells for $12-18/ton. Sized fines sell for $8-12/ton. Only rejects need disposal.
Get an Exact QuoteOn-site screening vs. hauling: cost comparison for Franklin contractors.
The economics of on-site screening in Franklin come down to one equation: sorted material is worth more than unsorted material. Clean aggregate sells for $12-18 per ton. Sized fines sell for $8-12 per ton. Mixed unsorted debris costs you $47.50 per ton to dispose of. A screener on your jobsite converts a disposal cost into a revenue source.
On a 500-ton C&D job, screening typically recovers 40-60% of the material as reusable product. That is 200-300 tons you do not have to haul at $4.50/mile to a facility 25 miles away. The hauling savings alone often cover the rental cost.
Franklin contractors who screen material regularly end up buying a screener through our main site for better long-term economics.
What vibratory screeners process. What they don't.
Vibratory screeners are built for dry to damp granular material: rock, gravel, soil, C&D debris. Wet, sticky, or fibrous material reduces throughput and blinds screen openings. Match the right screen panel to your material for best results.
Can screen
These materials flow across vibrating decks cleanly when fed at the right rate. The 3-way split separates each into fines, middles, and overs based on your screen panel sizes.
Not ideal for
Wet, sticky material blinds screen openings and reduces throughput. Metal scrap and large wood can damage screen panels. Pre-process with a grinder or magnet before screening these materials.
Screen USA CD410. Built by our team.
Track-mounted 2-deck vibratory screener with 3-way split. 74 HP Cat diesel, 5.5 cubic yard hopper, and three discharge conveyors. Not sure if it fits your project? Tell us your material and volume, we will confirm.
Screen USA CD410
- Engine74 HP Cat C2.2 Tier 4 Final
- Weight32,000 lbs
- Screen decks2-Deck, 4' x 10'
- Top deckPunch plate
- Hopper5.5 cu. yd
- Output3-way split
- Feed conveyor40" wide, 10'-6"
- Transport35'-10" x 8'-4" x 8'-3"
- MobilityTrack-mounted
Any material sorting, sizing, or scalping job. C&D debris, aggregate sizing, topsoil cleanup, pre-screening before a crusher, or mixed material separation. The 2-deck setup handles coarse and fine separation simultaneously.
Three steps. One business day.
Tell us what you need
Material type, estimated volume, target product sizes, Franklin jobsite location, and rental duration. Quick form or call 770-433-2670.
Get your quote
Our team confirms the CD410 fits your project, recommends screen panel configuration, and provides a competitive quote within one business day.
Equipment delivered
We coordinate delivery to your Franklin jobsite. Screener arrives track-ready on a lowboy. Pickup when you are done.
Why Franklin screens more material than ever.
Construction and demolition projects in Franklin generate mixed material that needs sorting before reuse or disposal. A vibratory screener on your Williamson County jobsite separates that material into three products in one pass: fines, middles, and overs. Sorted material sells for more than unsorted debris, and disposal volume drops significantly when reusable aggregate is pulled out.
We connect Franklin contractors with the Screen USA CD410 track-mounted vibratory screener delivered to your jobsite. The CD410 runs a 74 HP Cat diesel, handles 32,000 lbs of machine weight, and produces a 3-way split through two screen decks. Punch plate on top for coarse separation, woven mesh below for precision sizing. Three conveyors stockpile each product separately.
Franklin's 2.4% growth rate in Williamson County, one of the wealthiest counties in Tennessee, drives premium commercial and residential construction. Cool Springs commercial district expansion and Berry Farms mixed-use development sustain high-value construction demand. Corporate headquarters for Community Health Systems, Mars Petcare, and Nissan North America generate institutional construction investment.
Contractors working across Franklin's Downtown, Cool Springs, and Berry Farms areas need reliable equipment access. Having a screener delivered to your jobsite saves the round-trip haul to the nearest disposal facility every day you are on the job.
The nearest material processing facility to most Franklin jobsites is Williamson County Recycling Center. An on-site screener eliminates the haul to that facility entirely. Sort material where it sits, stockpile three products on-site, and reduce disposal volume before anything leaves the gate.
Same as Nashville metro. Pleasant four-season climate.
Franklin's active construction market drives demand for material sorting, aggregate sizing, and C&D debris separation. Current and recent projects include:
- Cool Springs commercial district expansion along Mallory Lane and Carothers Parkway, with new office and retail construction.
- Berry Farms mixed-use development on former farmland south of downtown, with subdivision infrastructure and building construction.
- Downtown Franklin Main Street corridor preservation and infill construction, with selective demolition and reconstruction.
Equipment rental demand in Franklin is driven by contractors supporting Community Health Systems, Mars Petcare, and Nissan North America, along with general construction and demolition companies serving Williamson County. The city's Limestone bedrock with rich clay-loam topsoil makes screening equipment valuable for processing excavated material into reusable fill. Healthcare facility construction, road and infrastructure improvements, and commercial development all contribute to steady demand for crushing and screening equipment.
Mixed C&D material hauled unsorted to Williamson County Recycling Center costs $47.50 per ton in tipping fees, plus $4.50 per loaded mile round-trip. On a 500-ton job with a 25-mile haul, that is $23,750 in tipping alone before trucking costs.
A vibratory screener on your Franklin jobsite sorts that same material into three products. Clean aggregate and sized fines have reuse value. Only the true reject material leaves the site. Screening reduces disposal volume by 40-60% on a typical C&D job, which means fewer truck loads and lower tipping bills.
Tennessee's mild climate keeps demolition and construction crews working twelve months a year. Material sorting demand is constant.
Highest demand for screening equipment. Book 2-3 weeks ahead during peak to secure your dates.
Post-storm cleanup generates heavy screening demand for mixed debris sorting and material recovery.
Delivered to your Franklin jobsite.
Equipment delivery to Franklin in Williamson County is served by I-65, US-31, and SR-96, providing efficient access for heavy equipment transport from staging yards across the region. The typical delivery radius covers Williamson County and surrounding counties within a 50 to 75 mile range. Standard delivery timelines apply, though contractors should coordinate scheduling in advance during peak construction season to secure preferred delivery windows.
Screener rental FAQ: Franklin.
Screener rental pricing in Franklin depends on rental duration and project scope. The CD410 handles most screening jobs from C&D sorting to aggregate sizing. Contact us at 770-433-2670 for a quote based on your Williamson County project.
The CD410 runs a 74 HP Cat C2.2 Tier 4 Final diesel engine with a 43.5 gallon fuel tank. Tier 4 Final compliance means no DEF fluid required. Fuel consumption depends on throughput rate and material density.
Yes. We coordinate delivery and pickup to jobsites throughout Franklin, Williamson County, and surrounding areas. The CD410 ships on a lowboy trailer. Most Franklin-area deliveries happen within 24-48 hours of quote approval.
If you screen material occasionally or for a single project, renting saves capital. If you screen material daily or run a material yard, purchasing delivers better ROI. GrinderCrusherScreen.com sells new Screen USA shaker screens and brokers quality used units. We have been matching contractors with the right equipment since 1973.
Yes. C&D debris sorting is one of the most common vibratory screener applications. The 3-way split separates clean aggregate from dirt and fines, and oversized material that needs further processing. Recover reusable material and reduce disposal volume in one pass.
A vibratory screener separates material by size using vibrating screen decks. Material bounces across the decks: undersized particles fall through to the fines conveyor, midsized particles fall through the second deck, and oversized material rides off the end. The CD410 produces three stockpiles in one pass.
A shaker screen uses flat vibrating decks. A trommel uses a rotating drum. Shaker screens handle higher throughput on coarse material like C&D debris and aggregate. Trommels excel at fine screening like topsoil and compost. For scalping before a crusher or sizing aggregate, a shaker screen is typically the better choice.
Need On-Site Screening? We'll Connect You.
Not looking to rent equipment yourself? We connect contractors, developers, and material yard operators with qualified operators who perform on-site screening using production-grade vibratory screeners. Tell us about your project and we'll match you with a provider in Franklin.
- Licensed operators with vibratory screening experience
- Equipment, fuel, and labor handled by the provider
- Sorted material stays on-site in three separate stockpiles
- One point of contact through GCS
Renting doesn't fit your operation?
GrinderCrusherScreen.com sells vibratory screeners, including the CD410 from our own Screen USA line, and brokers quality used units across North America. Helping contractors find equipment since 1973.
Get Franklin screener pricing.
Tell us about your project: material type, volume, target product sizes, and timeline. We will confirm the CD410 fits and quote it inside a business day. Or skip the form: talk to the team direct.
Mon-Fri 8am-5pm EST. Since 1973. Sales@grindercrusherscreen.com
Get rental pricing
Quote inside one business day.
Prefer to talk? Call 770-433-2670. Mon-Fri 8am-5pm EST