Concrete Crusher Rental in Atlanta, GA
Crush concrete on-site, not your budget.
Mobile jaw crushers for on-site concrete processing in Atlanta: turn demolition rubble into reusable aggregate, eliminate tipping fees, and keep trucks off the road. We connect you with Evortle CT-535 and CT-850 crushers ready for delivery.
What Atlanta contractors crush on-site.
Crush slabs, footings, and structural concrete from building teardowns directly on the demo site. Produce reusable aggregate without a single haul trip.
Process residential and commercial foundations after excavation. Jaw crushers handle rebar-reinforced concrete and reduce it to spec base material on-site.
Crush broken concrete from road, curb, and parking lot removal. Recycled aggregate goes right back under the new pour as compactable base.
Process heavy reinforced concrete from bridge deck and overpass demolition. The CT-850 handles large feed sizes and rebar without issue.
CMU block walls, brick structures, and masonry debris crush quickly into clean aggregate. Lower jaw pressure needed means faster throughput.
Natural rock, limestone, and stone from site excavation. Jaw crushers process virgin rock into spec material for fill, drainage, or road base.
Stop paying to haul rubble.
C&D tipping fees in Georgia average $50.0 per ton. Every truck load of concrete you send to the landfill costs you twice: once for tipping, again for the truck and driver. On-site crushing eliminates both and produces reusable base aggregate worth approximately $12 per ton.
Hauling cost based on $4.50/loaded mile, round-trip. Replacement aggregate valued at $12/ton (typical recycled concrete base price). Estimate only: your final quote uses real Atlanta-area rates and your project specifics.
per project, vs. hauling to the landfill
Crushed concrete produces reusable base aggregate (3/4" minus) worth approximately $12/ton. Material stays on your site or sells to neighboring projects.
Get an Exact QuoteOn-site crushing vs. hauling: cost comparison for Atlanta contractors.
The break-even point for on-site crushing in the Atlanta market is lower than most contractors expect. At $50.00/ton tipping and a 25-mile haul to Live Oak Landfill - College Park, a project with 50 tons of concrete already saves money by crushing on-site. The savings scale linearly: 200 tons means roughly $12,250 saved versus hauling, even after the crusher rental cost.
The math is straightforward. Haul-out costs include tipping fees, round-trip trucking, driver time, and the replacement aggregate you need to buy to backfill. On-site crushing costs include the rental, fuel, and an operator. The rental is a fixed weekly cost. The haul-out costs multiply with every truck load.
Atlanta contractors who run the numbers usually rent. The ones who process concrete regularly end up buying a crusher through our main site.
What jaw crushers process. What they don't.
Jaw crushers are built for hard, brittle materials: concrete, rock, brick, block. They are not designed for flexible or soft materials. Feeding the wrong material damages the jaw plates, voids your rental agreement, or both.
Can crush
Concrete, rock, brick, and block are what jaw crushers are engineered for. The CT-850 includes an integrated overband magnet for rebar separation. The CT-535 magnet is optional.
Can't crush
Asphalt requires an impact crusher, not a jaw crusher. Asphalt is flexible and gums up jaw plates instead of fracturing cleanly. If you have asphalt, ask us about impact crusher options.
Two models. Pick by project size.
We connect you with two Evortle jaw crushers in Atlanta: both track-mounted, same crushing principle, different production capacity. Not sure which fits? Tell us your project volume, we will size it.
Evortle CT-535
- Engine74 HP Hatz Tier 4 Diesel
- Weight14,330 lbs
- Jaw opening20" x 14"
- Hopper1 cu. yd
- Output CSS0.8" - 4"
- Transport length18'-9"
- MobilityTrack-mounted, wireless remote
Single-lot demos, residential foundation removal, or tight-access sites. Compact enough to fit through a gate and light enough for a tag-along trailer. Generally under 200 tons of material.
Evortle CT-850
- Engine150 HP Perkins Tier 4 Diesel
- Weight52,910 lbs
- Jaw opening32" x 20"
- Hopper4 cu. yd
- Output CSS1" - 4"
- Transport length38'-8"
- MobilityTrack-mounted, cross magnet std
Commercial demo, bridge teardown, road removal, or any project over 200 tons. The 32" x 20" jaw opening accepts large feed sizes without pre-breaking. Integrated cross magnet separates rebar automatically.
Three steps. One business day.
Tell us what you need
Material type, estimated volume, Atlanta jobsite location, and rental duration. Quick form or call 770-433-2670.
Get your quote
Our team matches you with the right crusher (CT-535 or CT-850) and provides a competitive quote within one business day.
Equipment delivered
We coordinate delivery to your Atlanta jobsite. Crusher arrives track-ready on a lowboy. Pickup when you are done.
Why Atlanta crushes more concrete than ever.
Atlanta's Fulton County issues demolition permits year-round. Between redevelopment in the Midtown area, steady tear-and-rebuild activity near Buckhead, and commercial site work across the metro, concrete demolition debris piles up fast. A portable jaw crusher on your demo site turns that pile into reusable base material: no haul trips, no tipping fees, no waiting for a landfill slot.
We connect Atlanta contractors with Evortle CT-535 and CT-850 jaw crushers delivered directly to the jobsite. The compact CT-535 fits through residential gates and handles single-lot teardowns. The CT-850 runs full production on commercial demo sites across Fulton County. Both produce spec aggregate you can use on your own project or sell to the site next door.
Atlanta's metro area, home to over 6,144,050 residents, continues to attract corporate relocations and technology firms, pushing Fulton County construction permits to record levels. The BeltLine's 22-mile corridor and Westside Park redevelopment are catalyzing billions in adjacent private investment. Year-over-year growth of 1.2% reflects sustained demand for demolition, grading, and material processing across the metro.
Contractors working across Atlanta's Midtown, Buckhead, and West End areas need reliable equipment access. Having a concrete crusher delivered to your jobsite saves the round-trip haul to the nearest disposal facility every day you are on the job.
The nearest quarry is Vulcan Materials - Lithia Springs (20 miles). The closest C&D recycling facility is Atlanta Recycling Center - Hapeville. Crushing on-site means you do not need either one: your demolition concrete becomes your base aggregate, right where you need it.
Mild winters allow year-round equipment operation. Summer heat and humidity may affect operator comfort but not equipment availability.
Atlanta's active construction market drives demand for demolition debris processing and concrete recycling. Current and recent projects include:
- BeltLine Westside Trail extension and adjacent mixed-use development requiring demolition of former industrial properties and concrete recycling across multiple parcels in the West End and Adair Park neighborhoods.
- Midtown Atlanta high-rise corridor construction along Peachtree Street, with multiple 30+ story residential towers requiring deep foundation excavation and material processing in Piedmont clay.
- Westside Park and Quarry development on the former Bellwood Quarry site, involving large-scale grading, drainage installation, and processing of existing on-site materials.
Equipment rental demand in Atlanta is driven by general contractors working the BeltLine and Midtown corridors, demolition companies clearing sites for high-rises, and utility contractors handling infrastructure upgrades. Major employers like Delta Air Lines and Home Depot generate corporate campus construction, while the city's 150+ annual tear-down permits create steady demolition equipment demand. Landscape and land-clearing contractors also rent screening equipment for topsoil processing on the region's Piedmont clay sites.
The nearest C&D landfill to most Atlanta jobsites is Live Oak Landfill - College Park, roughly 25 miles away. Tipping fees run $50.00 per ton. A 20-ton truck load costs you $50.0 x 20 = $1,000 in tipping alone, plus $225 in trucking at $4.50 per loaded mile round-trip. Ten truck loads: $12,250 hauling rubble that could have been base material.
An on-site jaw crusher eliminates every one of those costs. The crushed concrete produces 3/4-inch minus aggregate worth roughly $12 per ton. On a 200-ton job, that is $2,400 in recovered material value on top of the hauling costs you did not spend.
Georgia's mild climate keeps demo crews working twelve months a year. No weather downtime on crushing.
Highest demand for crushers. Book 2-3 weeks ahead during peak to secure your dates.
Brief rain delays possible. Crushing resumes immediately after storms pass: no permit implications like burning.
Delivered to your Atlanta jobsite.
Equipment delivery to Atlanta in Fulton County is served by I-75, I-85, and I-20, providing efficient access for heavy equipment transport from staging yards across the region. The typical delivery radius covers Fulton County and surrounding counties within a 50 to 75 mile range. Standard delivery timelines apply, though contractors should coordinate scheduling in advance during peak construction season to secure preferred delivery windows.
Concrete crusher rental FAQ: Atlanta.
Concrete crusher rental pricing in Atlanta depends on the model and rental duration. The compact CT-535 fits residential demo jobs. The production CT-850 handles commercial-scale work. Contact us at 770-433-2670 for a quote based on your Fulton County project.
Project volume determines the size. Under 200 tons of concrete: the CT-535 (14,330 lbs, 20x14 jaw) handles it. Over 200 tons or heavy reinforced material: the CT-850 (52,910 lbs, 32x20 jaw) runs production pace. Tell us your tonnage and material type, and we will size it.
Jaw crushers process concrete (plain and rebar-reinforced), concrete block, brick, and natural rock. They do NOT process asphalt. If your Atlanta project involves asphalt, you need an impact crusher. The CT-850 includes an integrated overband magnet for rebar separation. The CT-535 magnet is optional.
Yes. We coordinate delivery and pickup to jobsites throughout Atlanta, Fulton County, and neighboring communities. The CT-535 ships on a standard tag-along trailer. The CT-850 requires a lowboy. Most Atlanta-area deliveries happen within 24-48 hours of quote approval.
The CT-535 processes 15-30 tons per hour depending on product size. The CT-850 handles 65-130 tons per hour. Actual throughput depends on feed material, rebar density, and desired output size. Output is adjustable from 0.8-inch to 4-inch CSS.
The CT-850 includes a standard integrated overband magnet that automatically separates steel rebar from crushed aggregate. The CT-535 offers the magnet as an option. Rebar collects in a pile for scrap recycling. You do not need to cut rebar out of the concrete before feeding it into the crusher.
Yes. Jaw crushers handle concrete block, brick, and masonry along with poured concrete. These materials crush faster than reinforced structural concrete because they have no rebar. The output is clean aggregate suitable for fill and base material.
Need On-Site Crushing? We'll Connect You.
Not looking to rent equipment yourself? We connect contractors, developers, and property owners with qualified operators who perform on-site concrete crushing using professional-grade jaw crushers. Tell us about your project and we'll match you with a provider in Atlanta.
- Licensed operators with jaw crusher experience
- Equipment, fuel, and labor handled by the provider
- Crushed material left on-site as reusable base aggregate
- One point of contact through GCS
Renting doesn't fit your operation?
GrinderCrusherScreen.com sells new Evortle jaw crushers and brokers quality used units across North America. Helping contractors find equipment since 1973.
Get Atlanta concrete crusher pricing.
Tell us about your project: material type, volume, and timeline. We will match you with the right crusher and quote it inside a business day. Or skip the form: talk to the team direct.
Mon-Fri 8am-5pm EST. Since 1973. Sales@grindercrusherscreen.com
Get rental pricing
Quote inside one business day.
Prefer to talk? Call 770-433-2670. Mon-Fri 8am-5pm EST