Rent a Concrete Crusher in Auburn, AL
Crush concrete on-site, not your budget.
Mobile jaw crushers for on-site concrete processing in Auburn: turn demolition rubble into reusable aggregate, eliminate tipping fees, and keep trucks off the road. We connect you with Evortle CT-535 and CT-850 crushers ready for delivery.
What Auburn contractors crush on-site.
Crush slabs, footings, and structural concrete from building teardowns directly on the demo site. Produce reusable aggregate without a single haul trip.
Process residential and commercial foundations after excavation. Jaw crushers handle rebar-reinforced concrete and reduce it to spec base material on-site.
Crush broken concrete from road, curb, and parking lot removal. Recycled aggregate goes right back under the new pour as compactable base.
Process heavy reinforced concrete from bridge deck and overpass demolition. The CT-850 handles large feed sizes and rebar without issue.
CMU block walls, brick structures, and masonry debris crush quickly into clean aggregate. Lower jaw pressure needed means faster throughput.
Natural rock, limestone, and stone from site excavation. Jaw crushers process virgin rock into spec material for fill, drainage, or road base.
Stop paying to haul rubble.
C&D tipping fees in Alabama average $42.5 per ton. Every truck load of concrete you send to the landfill costs you twice: once for tipping, again for the truck and driver. On-site crushing eliminates both and produces reusable base aggregate worth approximately $12 per ton.
Hauling cost based on $4.50/loaded mile, round-trip. Replacement aggregate valued at $12/ton (typical recycled concrete base price). Estimate only: your final quote uses real Auburn-area rates and your project specifics.
per project, vs. hauling to the landfill
Crushed concrete produces reusable base aggregate (3/4" minus) worth approximately $12/ton. Material stays on your site or sells to neighboring projects.
Get an Exact QuoteOn-site crushing vs. hauling: cost comparison for Auburn contractors.
The break-even point for on-site crushing in the Auburn market is lower than most contractors expect. At $42.50/ton tipping and a 25-mile haul to Lee County Landfill, a project with 50 tons of concrete already saves money by crushing on-site. The savings scale linearly: 200 tons means roughly $10,750 saved versus hauling, even after the crusher rental cost.
The math is straightforward. Haul-out costs include tipping fees, round-trip trucking, driver time, and the replacement aggregate you need to buy to backfill. On-site crushing costs include the rental, fuel, and an operator. The rental is a fixed weekly cost. The haul-out costs multiply with every truck load.
Auburn contractors who run the numbers usually rent. The ones who process concrete regularly end up buying a crusher through our main site.
What jaw crushers process. What they don't.
Jaw crushers are built for hard, brittle materials: concrete, rock, brick, block. They are not designed for flexible or soft materials. Feeding the wrong material damages the jaw plates, voids your rental agreement, or both.
Can crush
Concrete, rock, brick, and block are what jaw crushers are engineered for. The CT-850 includes an integrated overband magnet for rebar separation. The CT-535 magnet is optional.
Can't crush
Asphalt requires an impact crusher, not a jaw crusher. Asphalt is flexible and gums up jaw plates instead of fracturing cleanly. If you have asphalt, ask us about impact crusher options.
Two models. Pick by project size.
We connect you with two Evortle jaw crushers in Auburn: both track-mounted, same crushing principle, different production capacity. Not sure which fits? Tell us your project volume, we will size it.
Evortle CT-535
- Engine74 HP Hatz Tier 4 Diesel
- Weight14,330 lbs
- Jaw opening20" x 14"
- Hopper1 cu. yd
- Output CSS0.8" - 4"
- Transport length18'-9"
- MobilityTrack-mounted, wireless remote
Single-lot demos, residential foundation removal, or tight-access sites. Compact enough to fit through a gate and light enough for a tag-along trailer. Generally under 200 tons of material.
Evortle CT-850
- Engine150 HP Perkins Tier 4 Diesel
- Weight52,910 lbs
- Jaw opening32" x 20"
- Hopper4 cu. yd
- Output CSS1" - 4"
- Transport length38'-8"
- MobilityTrack-mounted, cross magnet std
Commercial demo, bridge teardown, road removal, or any project over 200 tons. The 32" x 20" jaw opening accepts large feed sizes without pre-breaking. Integrated cross magnet separates rebar automatically.
Three steps. One business day.
Tell us what you need
Material type, estimated volume, Auburn jobsite location, and rental duration. Quick form or call 770-433-2670.
Get your quote
Our team matches you with the right crusher (CT-535 or CT-850) and provides a competitive quote within one business day.
Equipment delivered
We coordinate delivery to your Auburn jobsite. Crusher arrives track-ready on a lowboy. Pickup when you are done.
Why Auburn crushes more concrete than ever.
Auburn's Lee County issues demolition permits year-round. Between redevelopment in the Downtown area, steady tear-and-rebuild activity near College Street, and commercial site work across the metro, concrete demolition debris piles up fast. A portable jaw crusher on your demo site turns that pile into reusable base material: no haul trips, no tipping fees, no waiting for a landfill slot.
We connect Auburn contractors with Evortle CT-535 and CT-850 jaw crushers delivered directly to the jobsite. The compact CT-535 fits through residential gates and handles single-lot teardowns. The CT-850 runs full production on commercial demo sites across Lee County. Both produce spec aggregate you can use on your own project or sell to the site next door.
Auburn's 2.0% growth rate in Lee County is driven by Auburn University's continuous campus expansion and the I-85 corridor's emergence as an economic development corridor. Downtown mixed-use development and Tiger Town commercial growth add retail and residential construction. SiO2 Materials Science and Briggs and Stratton manufacturing operations maintain industrial construction demand.
Contractors working across Auburn's Downtown, College Street, and Opelika (adjacent) areas need reliable equipment access. Having a concrete crusher delivered to your jobsite saves the round-trip haul to the nearest disposal facility every day you are on the job.
The nearest quarry is Martin Marietta - Opelika (5 miles). The closest C&D recycling facility is Lee County Recycling Center. Crushing on-site means you do not need either one: your demolition concrete becomes your base aggregate, right where you need it.
East Alabama Piedmont climate. Four seasons with occasional severe weather.
Auburn's active construction market drives demand for demolition debris processing and concrete recycling. Current and recent projects include:
- Auburn University campus expansion including new engineering and science research facilities, with demolition of aging campus structures.
- Downtown Auburn mixed-use development along College Street and Magnolia Avenue, with infill construction and selective demolition.
- I-85 corridor commercial development between Auburn and Opelika at the Tiger Town area, with mass site preparation.
Equipment rental demand in Auburn is driven by contractors supporting Auburn University, East Alabama Medical Center, and Lee County Schools, along with general construction and demolition companies serving Lee County. The city's Piedmont red clay makes screening equipment valuable for processing excavated material into reusable fill. Healthcare facility construction, road and infrastructure improvements, and commercial development all contribute to steady demand for crushing and screening equipment.
The nearest C&D landfill to most Auburn jobsites is Lee County Landfill, roughly 25 miles away. Tipping fees run $42.50 per ton. A 20-ton truck load costs you $42.5 x 20 = $850 in tipping alone, plus $225 in trucking at $4.50 per loaded mile round-trip. Ten truck loads: $10,750 hauling rubble that could have been base material.
An on-site jaw crusher eliminates every one of those costs. The crushed concrete produces 3/4-inch minus aggregate worth roughly $12 per ton. On a 200-ton job, that is $2,400 in recovered material value on top of the hauling costs you did not spend.
Alabama's mild climate keeps demo crews working twelve months a year. No weather downtime on crushing.
Highest demand for crushers. Book 2-3 weeks ahead during peak to secure your dates.
Brief rain delays possible. Crushing resumes immediately after storms pass: no permit implications like burning.
Delivered to your Auburn jobsite.
Equipment delivery to Auburn in Lee County is served by I-85, US-280, and US-29, providing efficient access for heavy equipment transport from staging yards across the region. The typical delivery radius covers Lee County and surrounding counties within a 50 to 75 mile range. Standard delivery timelines apply, though contractors should coordinate scheduling in advance during peak construction season to secure preferred delivery windows.
Concrete crusher rental FAQ: Auburn.
Concrete crusher rental pricing in Auburn depends on the model and rental duration. The compact CT-535 fits residential demo jobs. The production CT-850 handles commercial-scale work. Contact us at 770-433-2670 for a quote based on your Lee County project.
We recommend booking 1-2 weeks ahead for standard projects and 2-3 weeks during peak season (March through October in Alabama). Emergency or rush requests are handled when equipment is available. Call 770-433-2670 and we will confirm the earliest delivery date for your Auburn jobsite.
Crushed recycled concrete sells for roughly $8-$15 per ton depending on your local market. Even if you do not sell it, using it on your own project replaces virgin aggregate you would otherwise have to buy. On large demo jobs, the material value alone can offset a significant portion of the crusher rental cost.
Both the CT-535 and CT-850 run on standard diesel fuel. Fuel consumption depends on throughput rate and material hardness. Typical consumption ranges from 3-8 gallons per hour. Plan for on-site fuel delivery on longer rental periods.
Yes, but wire mesh is trickier than rebar. The jaw handles the concrete fine, but mesh can wrap around the magnet or conveyor. Pre-cutting sections of heavily meshed concrete into manageable chunks reduces jams. Our team can advise on the best approach for your material.
Both the CT-535 and CT-850 produce adjustable output. The CT-535 adjusts from 0.8-inch to 4-inch CSS. The CT-850 adjusts from 1-inch to 4-inch CSS. The most common setting is 3/4-inch to 1-inch minus, which meets most base material and fill specifications. You can adjust the jaw gap on-site to match your project requirements.
On-site crushing eliminates tipping fees ($42/ton in Alabama), trucking costs, and replacement aggregate purchases. On a 200-ton job, that adds up to $10,000+ in savings versus hauling to the landfill. The crushed material becomes reusable base worth roughly $12/ton.
Need On-Site Crushing? We'll Connect You.
Not looking to rent equipment yourself? We connect contractors, developers, and property owners with qualified operators who perform on-site concrete crushing using professional-grade jaw crushers. Tell us about your project and we'll match you with a provider in Auburn.
- Licensed operators with jaw crusher experience
- Equipment, fuel, and labor handled by the provider
- Crushed material left on-site as reusable base aggregate
- One point of contact through GCS
Renting doesn't fit your operation?
GrinderCrusherScreen.com sells new Evortle jaw crushers and brokers quality used units across North America. Helping contractors find equipment since 1973.
Get Auburn concrete crusher pricing.
Tell us about your project: material type, volume, and timeline. We will match you with the right crusher and quote it inside a business day. Or skip the form: talk to the team direct.
Mon-Fri 8am-5pm EST. Since 1973. Sales@grindercrusherscreen.com
Get rental pricing
Quote inside one business day.
Prefer to talk? Call 770-433-2670. Mon-Fri 8am-5pm EST